- ISO 9001 · CE · IEC 60076
- SGS / BV Inspection
- Shipping to 15+ Countries
Isolation Transformers
Galvanic isolation transformers with electrostatic shielding for noise protection. Separating the load from the supply protects sensitive equipment, breaks earth loops and blocks the conducted noise that upsets measurement and control systems.
View details
Mining Transformers
Flameproof transformers rated for underground service. Explosion-proof enclosure, reinforced mechanical construction and dust and moisture sealing for coal and metal mines where an ignition source cannot be tolerated.
View details
Rectifier Transformers
Multi-pulse, phase-shifting rectifier transformers for electrolysis, DC drives and industrial rectifier duty. Phase-shifted secondary windings give 12-, 24- or higher-pulse operation, which cuts harmonic distortion fed back into the network.
View details
Furnace Transformers
Arc and induction furnace transformers built for very high secondary current at low voltage, with the short-circuit strength to survive the repeated faults that furnace operation produces as a matter of routine.
View details
Energy Storage Transformers
Transformers for battery energy storage systems, designed for bidirectional power flow. Charging and discharging load the unit in both directions with rapid reversal, and the specification has to account for that rather than assume one-way distribution duty.
View details
Wind Turbine Transformers
Onshore and offshore wind turbine transformers from 500 kVA to 10 MVA. Compact enough for nacelle or tower-base installation, and built to take continuous vibration, cyclic loading and — offshore — a salt-laden atmosphere.
View details
Solar Step-Up Transformers
PV grid-connection step-up transformers from 100 kVA to 100 MVA. Designed for the duty cycle a solar plant actually has — daily start-stop, wide temperature swing, harmonic content from inverters and long periods at partial load.
View details
Pre-Fabricated Containerised Substations
Containerised substations from 500 kVA to 63 MVA. The complete electrical room is built and commissioned inside a shipping container, then delivered as one unit — the fastest route to energising a remote or fast-track site.
View details
Compact Substations (European Style)
European-style compact substations from 100 kVA to 6,300 kVA. Transformer, HV switchgear and LV distribution are pre-assembled and factory-tested in one enclosure, so site work is reduced to placing it and connecting the cables.
View details
American Style Substations
Pad-mounted, dead-front package substations built to the American arrangement — transformer, HV switching and protection in one tamper-resistant enclosure at ground level, safe for installation in public and residential areas.
View details
Amorphous Alloy Transformers
Cores wound from amorphous alloy ribbon instead of stacked silicon steel, cutting no-load loss sharply. No-load loss is paid for every hour the transformer is energised, so on a lightly loaded distribution feeder this is where the annual energy bill is actually decided.
View details
VPI Dry-Type Transformers
Vacuum Pressure Impregnated dry-type transformers with Class F/H insulation. Windings are impregnated under vacuum and pressure rather than resin-encapsulated, giving good heat dissipation and overload behaviour at a lower cost than a cast resin unit of the same rating.
View details
Cast Resin Dry-Type Transformers
Windings vacuum-cast in epoxy resin: flame-retardant, self-extinguishing, maintenance-free and free of oil. Class F/H insulation. The default choice wherever the transformer has to stand inside the building — hospitals, airports, high-rises, metro lines and data centres.
View details
Power Transformers 35 kV – 500 kV
Large oil-immersed power transformers for high-voltage transmission and substation duty, 35 kV up to 500 kV. Built for continuous full-load service, with cooling, insulation and sealing specified to the site — including sustained operation above 50 °C in desert conditions.
View details
Pad-Mounted & Pole-Mounted Transformers
The S13 - S11 - M-RL series stereoscopic triangle roll of iron core transformer enjoys special allowance treatment and expert cooperation. After successful research and development, it produces more energy-saving materials. The product has passed the national transformer quality inspection center of the whole experiment.
View details
Distribution Transformers
The three-phase oil-immersed distribution transformer applies a new type of insulating structure and makes short-circuit resistance strong. The iron core is made of high-quality cold-rolled silicon-steel plate.
View detailsCapability
What we can put on a container.
Ratings below cover our standard catalogue. Anything outside it is quoted against your single-line diagram — voltage level, capacity, cooling type, impedance, vector group, tap changer and enclosure rating are all specifiable.
10 kV – 500 kV
Voltage class across the range
5 kVA – 500 kVA
Pad-mounted & pole-mounted units
100 kVA – 6,300 kVA
European-style compact substations
500 kVA – 63 MVA
Containerised pre-fabricated substations
100 kVA – 100 MVA
Solar step-up transformers
500 kVA – 10 MVA
Wind turbine transformers, on- and offshore
Special working environments — high temperature, high humidity, dust, salt haze, high altitude or corrosive atmosphere — are handled at the specification stage, not left to chance on site.
Request Full Data SheetsNot sure which series fits your load?
Send us the voltage class, capacity and installation environment — we will come back with a recommendation.
